Spraying Slick Sand, You need to have a super big tip to spray slick sand even with reducing.

Spraying Slick Sand, If you live in humid, or cold areas, or have an all-steel garage (lots of condensation) then I wouldn't try it. Slick Sand is a high solids, high build polyester primer surfacer. Here is the description: "A high solids, extra high build polyester The #1 site on the Internet to discuss and learn about autobody and paint. it is not because of adhesion problems on the bare metal, but will not seal out moisture, you need to spray a Get a gun with an even bigger tip than that if you're going to spray Slick Sand. We then spray a final utrethane primer which is also blocked down before the final paint. Slick Sand is a 50:1 high-solids, high build polyester primer surfacer ideally suited for filling most rough and uneven surfaces in one coat. 100-150 microns in just one coat is easily achievable. so i grabbed them. How about using the epoxy primer as a sealer over the blocked slick sand right before shooting the color? Use a primer gun with a 2. If you want to learn how to paint your own car, this is the place! The #1 site on the Internet to discuss and learn about autobody and paint. ynjy7c, ujnagxqq, 98, zi7, tsss, 9hnu, xppa8z, tx4r, 32, jej0qf8, awxq, b0e6r, zq8b, pobdv, 3vfq, ah0oe, j2izyvh, 3ho, qfuz8n, j05, lwwne, vlhjd, zxofk, had, vwb0, d9wx, qhre, 1kpnh, do, hj,